17
2
7
2.4
7
2.4
2.8
7
27
37
37.4
10
37
2.8
27.4
10
24.8
41.5
Computer-controlled, High-speed Bartacking Machine for Eyelet Buttonholes
LK-1901A
LK-1901A-SS (Table stand is optionally available.)
Work clamp foot Feed plate Number of pattern
Provided as
13544465 14143002
standard
17
LK-1902A-SS
18
LK-1902A-HS
13545660 13545504
Option
19
For large size
20
21
13545801
22
13547161
13547005
22
■ WORK CLAMP FOOT AND FEED PLATE FOR LK-1902A
(for belt-loop attaching)
✽ A finger guard is included in the presser foot.
Computer-controlled, High-speed Belt-loop-attaching Machine
LK-1902A
LK-1902A-SS (Table stand is optionally available.)
The machine is provided with a material-drawing mechanism which
draws the right and left parallel portions of an eyelet buttonhole
near to one another.
The machine performs bartacking with the right and left parallel
portions of the eyelet buttonhole drawn near to one another after
the buttonhole is clamped under the work clamp foot, thereby finishing
highly durable and well-tensed eyelet buttonholes.
The machine ensures high-quality bartacks on
eyelet buttonholes.
The machine is provided as standard with six different linear bartacking
patterns. Since the sewing size can be easily changed, the optimal
number of stitches and sewing size can be speedily selected according
to the belt-loop width. If the normally used patterns are assigned
to the patterns keys, a desired pattern can be called up or changed
with single-key operation.
The sewing pattern best suited to the sewing product
to be bartacked can be selected by single-key operation.
With its broadly curved feed bracket (presser arm), the machine permits
easy placement of the material to be sewn. The slimly shaped bed
and head design that allows free space under the arm demonstrates
greater operability in handling materials on the machine and
continuous processes. These features contribute substantially to
increased productivity in belt-loop attachment processes.
The machine head has been designed
with an emphasis on operability.
Three different sewing patterns are prepared to enable easy switchover
of sewing sizes. If the sewing patterns are assigned to the pattern keys
on the operation panel, the sewing patterns can be called up or
changed with single-key operation.
The machine sews the most optimally suited bartacks on eyelet
buttonholes on the front bodies of garments and straight buttonholes
that differ in stitch number and size on jacket lapels, thereby improving
the finished quality of sewing products.
The sewing pattern best suited to the sewing product
to be bartacked can be selected by single-key operation.
The material drawing amount can be adjusted to 3mm at maximum.
The material drawing mechanism can be switched ON/OFF in
accordance with the setting of the memory switch. With these
features, the material drawing mechanism can be used with greater
flexibility.
The material drawing mechanism can be
switched to ON/OFF.
Option
For extra
large size
To Next Page
Loading...
