– 65 –
8) CP-8 (Software version display)
The software versions of the MAIN and SDC boards are displayed.
Each version comes in the type description of RR-VV-LL-xx. “xx” is used for the specications of special or-
dering. It is not displayed usually.
(Example: 01-01-01, 01-01-02, 01-02-01)
1. Operation
According to the item selection LED, RR-VV-LL-xx of the MAIN
and SDC boards is respectively displayed. Changeover is possible
by pressing the key. Contents of the display are shown in
the table below.
Display changeover is possible with the key in the order of
RR
→
VV
→
LL
→
(xx)
→
for the MAIN board and RR
→
VV
→
LL
→
(xx)
→
for the SDC board.
RR-VV-LL-xx display for the MAIN and SDC boards for each item selection LED
Pattern LED
X enlarge
LED
Y enlarge
LED
Speed LED
Counter
LED
Bobbin
winder LED
Threading
LED
Tension LED
MAIN board
RR
MAIN board
VV
MAIN board
LL
MAIN board
xx
SDC board
RR
SDC board
VV
SDC board
LL
SDC board
xx
To Next Page
Loading...
