JUKI LK-1910 Engineer's Manual

− 105 −
(1) Operating method
1) How to start the test mode
ExplanationStep Operation method Indication
READY
RESET
R
OFF ON
Keep
pressing.
Turn ON the
power switch.
Pressing
READY
key and
RESET
R
key, turn ON the power
switch.
(Starting of the user level
of memory switch)
P3
SELECT
FORWARD BACK
or
1
2
3
4
5
6
7
(Example)
If the test program No.
to be selected is CP-1.
Further, simultaneously press
down
P1
key,
P2
key and
P3
key. Then the mode will
move to the test mode, and the
indicating output test will be
immediately started.
P3
P1 P2
When
P1
key and
P3
key are simultaneously
pressed down, the step will
return to the step 5.
However, when test No. CP-
3 is selected, it cannot be
returned to the step 5. At this
time, turn OFF the power
switch.
Test program No. will be
decided by pressing down
SELECT
key.
Test program No. will be
changed by pressing down
FORWARD
or
BACK
keys.
By operation of either key,
the indication will move to
the selection of other test
function.
Press either key of the above ones.
SELECT
P1 P2
Immediately after turning ON the
power switch, simultaneously
press
P3
key and
SELECT
key.
(Moving to the service level of
memory switch)
Refer to 1 Indicating
output test.

JUKI LK-1910 Specifications

General

Brand	JUKI
Model	LK-1910
Category	Sewing Machine
Language	English