INTRODUCTION
This
booklet
consists mainly
of
3 parts,
the
first
part
is for
the
"Standard
Adjust
ments" covering the basic adjustments and their directions, the second part is for
elimination
of
mechanical
troubles
and
the
third
part
is
for
the
subclass models
of
the
LK-980
series.
We hope all service engineers will read and study carefully the first part "Standard
Adjustment."
The
"Standard
Adjustment"
explained in simple terms with illustrations will
facilitate quick access to the practical services for service engineers in the field. The
columns "Possible problems or phenomena caused by improper adjustments" and
"Corrections"
are
added
for
inexperienced
service engineers.
To make optimum use
of
this booklet, we advise you to refer to "PARTS BOOK
for
the
LK-980
series."
If
the
brief descriptions given in "Standard Adjustment" are
not
enough, refer
to
the
relative
item
for
further
details.
To Next Page
Loading...
