Need help?Do you have a question about the JUKI LK-1903A and is the answer not in the manual?
General| Lubrication | Automatic |
|---|---|
| Type | Lockstitch |
| Needle | DB x 1 |
| Hook | Standard hook |
| Stitch Type | Lockstitch |
| Presser Foot Lift | 17 mm |
| Lubricating oil | JUKI Genuine Sewing Machine Oil or equivalent |
Procedure for adding or modifying thread tension commands at needle entry points.
Procedure to select pattern buttons from the data input screen.
Procedure for creating new combination sewing data.
General procedure for modifying memory switch settings.
Detailed instructions for changing Level 1 memory switch data.
Detailed instructions for changing Level 2 memory switch data.
View information related to maintenance and inspection schedules.
Steps for performing trial sewing with data from PM-1.
Accessing the main menu for diagnostic check programs.
Calibrating the touch panel for accurate input.
Checking the status (ON/OFF) of various sensors.
Checking the operation and status of X/Y motors and origin sensors.
Checking presser, thread trimmer motors, and their origin sensors.
Checking thread clamp motor and its origin sensor.
Procedure for rewriting programs via the communication screen.
Accessing and viewing the machine's error history log.
To Next Page
