142
34-7 Performing X/Y motors/origin sensors check
① Display the X/Y motors/origin sensors check
screen.
When X/Y MOTORS/ORIGIN SENSORS
CHECK button
(A) in the check program
screen is pressed, the X/Y motors/origin
sensors check screen is displayed.
② Perform X/Y motors/origin sensors check.
ON/OFF status of the sensor is displayed at
the position of B according to the status of
X/Y origin sensors.
Press ARROW MARK buttons
(C)
and X/Y motors are driven by 0. 1 mm at a
time in the +/- direction.
(Caution) Motors which have not been
selected are driven as well in order
to interpolate the arc.
Perform the origin retrieval of X/Y motors to
both shafts with the start switch.
B
C
A
To Next Page
Loading...
