JUKI LK-1903A - To Continue Performing Sewing from some Point in Sewing

31
10-1 To continue performing sewing from some point in sewing
① Release the error.
Press RESET button
(B) to release the
error.
② Perform thread trimming.
Press THREAD TRIM button
(C) to
perform When thread trimming has been
performed, FEED BACK button
(D) ,FEED FORWARD button
(E) and
RETERN TO ORIGIN button
(F) are
displayed on the screen.
③ Adjust the presser to the re-sewing position.
When FEED BACK button
(D) is pressed,
the presser returns stitch and by stitch and
when FEED FORWARD button
(E) is
pressed, it advances stitch by stitch. Move the
presser to the re-sewing position.
④ Re-start the sewing
When the pedal is depressed, sewing starts
again.
E
D
F
C