LK-1941ZA, 1942HA, LK-1942GA (September, 2003) 2/3
LK1941ZA Z
LK1942 A Z
Model name
Application
Max. sewing speed
Sewing area
Stitch length
Needle bar stroke
Lift of the feeding frame
Lift of the intermediate presser
Stroke of intermediate presser
Heat cutter
Needle that can be trimmed
Needle (at the time of delivery)
Hook
Feed motion work clamp foot
Number of stitches that can be
stored in memory
Number of patterns that can be input
Enlarging/Reducing facility
Bobbin thread counter
Memory medium
Lubrication
Lubricating oil
Compressed air and air consumption
Sewing machine motor
Power consumption
Weight
LK-1941ZA
For extra heavy-weight materials
Heater unit 3.5kg
―
―
Provided as standard
Synthetic only: #8〜#1
B92〜B277
30/3〜8/3
DP×17 (#25) #24
〜
#26
LK-1942HA
For heavy-weight materials
#30〜#8
B46〜B92
60/3〜30/3
DP×17 (#18) #18
〜
#20
#8〜#2
B92〜B207
30/3〜10/3
DP×17 (#23) #21
〜
#23
LK-1942GA
For extra heavy-weight materials
2,200rpm (when stitch length is 3mm or less)
60mm (L)×100mm (W)
0.1
〜
10mm
41.2mm
Max. 25mm
18mm
Standard 4mm (0mm and 4
〜
10mm)
Option
―
SPECIFICATIONS
WHEN YOU PLACE ORDERS
Code
Z
Application
For extra heavy-
weight materials
with heat cutter
(with heat cutter, without intermediate presser)
Code
H
G
Application
For heavy-weight materials
For extra heavy-weight materials
Code
1
2
Specification
With heat cutter (for LK-1941)
Without heat cutter (for LK-1942)
(without heat cutter, with intermediate presser)
＊The table stand is not equipped with casters.
Code
5000
5001〜
Subclass
Standard
Subclass
Code
5000
5001〜
Subclass
Standard
Subclass
MC594 F
JTK35
Code
K
D
L
M
Single-phase
3-phase
Single-/3-phase
200〜240V
200〜240V
220〜415V
220〜415V for CE
(not provided
with power switch)
Code
F
Pedal switch
1-pedal unit
● Machine head ● Control box
● Table stand: optional
Full-rotary 3 fold-capacity hook
R-theta intermittent feed (2-shaft drive by stepping motor)
Max. 10,000 stitches
64 patterns
20
〜
200% (1% step), by increasing/decreasing the stitch length
Provided as standard
EEP-ROM
Centralized oil wick lubrication
JUKI New Defrix Oil No.2 (equivalent to ISO VG32)
0.5MPa (5kgf/cm
2
) , 1.3N /min
480W compact AC servomotor (direct-drive system)
Single-phase, 3-phase 600W
Machine head (include motor) 46kg, Control box 16.5kg
Power supply
To Next Page
Loading...
Need help?
General
