APW-194N, 195N, 196N (September, 2003) 3/4
Model
SA84
SA85N
SA86N
SA88
SA89
SA90N
SA91
SA92
SA101
SA94
SA96N
SA97N
SA98
SP41
SP42
SP43
Part No.
GSA-840000A0A
GSA-85000DA0B
GSA-85000EA0B
GSA-85000FA0B
GSA-86000DA0
GSA-86000EA0
GSA-880000A0
GSA-890000A0A
GSA-90000GA0
GSA-90000HA0
GSA-90000IA0
GSA-910000A0
GSA-920000A0
―
GSA-94000CA0
GSA-96000AA0B
GSA-96000BA0B
GSA-97000GA0A
GSA-97000HA0A
GSA-97000IA0A
GSA-97000JA0A
GSA-97000KA0A
GSA-97000LA0A
GSA-980000A0
―
―
―
Description
Dart stretcher
Needle gauge: 8, 10, 12mm
Needle gauge: 14, 16mm
Needle gauge: 18, 20mm
Needle gauge: 8〜16mm
Needle gauge: 18, 20mm
Stand for standing work
Small-welt sewing device
Needle gauge: 8〜12mm
Needle gauge: 14, 16mm
Needle gauge: 18, 20mm
Suction motor (for sim type table)
Automatic pocket bag presser
(for sim type table)
Automatic pocket bag presser
(for standard table and vacuum type
table)
Center reference device
Needle gauge: 8〜14mm
Needle gauge: 16〜20mm
Needle gauge: 8〜14mm (for left)
Needle gauge: 16〜20mm (for left)
Needle gauge: 8〜14mm (for right)
Needle gauge: 16〜20mm (for right)
Needle gauge: 8〜14mm (for double)
Needle gauge: 16〜20mm (for double)
Single-welt and double-welt change-over
device
Grasping stacker
Bar stacker
Roller stacker
Feature
The dart stretcher holds the end of the material when making a welt on a
darted part of the material to make it easier to set the darted part and improve
the reliability of the welting.
Shim device
This device encloses a garment body between its upper and lower parts and
feeds it to the needle entry area. It is especially useful for difficult-to-feed
garment bodies.
Automatic interlining feeder
To improve workability, the automatic interlining feeder automatically delivers
rolled interlining cloth onto the table and cuts it.
This stand is mounted under the main body of the machine to adjust the height
of the main body to standing work.
This device is designed for the sewing of small welts as short as 35mm or less.
The smallest possible welt size is 18mm.
(Neither the center knife nor corner knife can be used for welts measuring
21mm or less.)
Suction device (for sim type table)
The device picks up the garment body by suction force to facilitate setting of
materials on the machine.
Use the device with a suction motor (SA91).
This is the blower motor for the suction device (SA90N).
The automatic pocket bag presser is used to hold pocket bags under the
garment body when welting and pocket bag sewing are performed
concurrently.
＊This device equipped as standard for APW-194N. (SA92 or SA101)
This optional device is useful to sew welts oriented longitudinally from the
center of maximum-sized welts. It is intended for the sewing of welts with
darts placed in the direct front-to-back center of the welting length.
The device is effective when used for sewing welts with flaps.
Single-welt and double-welt change-over device (for APW-195N, APW-196N)
The clamp foot can be moved by fingertip control. The sewing machine is well
suited for the sewing of welts on upper garments since its specification can be
easily changed over between double-welt type and single-welt type simply by
changing a binder. The machine comes in three different types: the left single-
welt type for sewing left single-welts, the right single-welt type for sewing right
ones, and the double-side welt type designed to change over the welt type
between the left and right single-welt types.
The clamp foot can be shifted by a simple one-touch operation. Changeover
between double-welt and single-welt sewing can be easily accomplished by
replacing the binder. The single-welt changeover function comes in two
different types: the right-hand single-welt type and left-hand single-welt type.
＊This device equipped as standard for APW-195N.
The general-purpose stacker has a wide range of applications, including men's
wear, ladies' wear, sportswear, jumpers, etc.
This stacker is suited to welting on the hip pockets of slacks, pants of working
uniforms, etc.
This is a stacker suited for small articles that cannot be feed by a bar stacker or
grasping stacker.
OPTIONS
Needle gauge Throat plate asm. Needle clamp asm. Knife
Needle thread
counter knife
Needle thread
clamp plate
8mm (5/16")
10mm (25/64")
12mm (15/32")
14mm (35/64")
16mm (5/8")
18mm (45/64")
20mm (25/32")
For knife, left
Part No.
164-01150
164-01259
164-01358
164-01457
164-01556
164-01655
164-01754
For knife, right
＊
Part No.
164-02356
164-02455
164-02554
164-02653
164-02752
164-02851
164-02950
Part No.
G1402-116-JA0
G1402-116-BA0
G1402-116-CA0
G1402-116-DA0
G1402-116-EA0
G1402-116-FA0
G1402-116-GA0
Part No.
251-37100
164-09500
164-10508
164-11100
Part No.
164-09906
164-11308
Part No.
164-10201
164-11407
SEWING MACHINE COMPONENTS
＊For APW-195N, APW-196N
To Next Page
Loading...
Need help?
General
