MO-6900C Series (September, 2003) 2/2
WHEN YOU PLACE ORDERS
M
O
69 C
M
O
69 C /AK102/SY35
DEVISES AND ATTACHMENTS
● Chain-off thread trimming device
● Blower-type chain-off thread suction device
● Pneumatic chain-off thread suction device
● Auto-lifter
● Blind hemming device
● Cloth tensioner
● Ruler, Miscellaneous
Model Part No. Description
T043 MAT-0430000A0 Pneumatic side cutter
MC-38 ― Pneumatic chain-off thread + cloth chips
MC-39 ― Function of MC-8 + auto-lifter
AK93 GAK-930000A0 Pneumatic type (knee-operated)
AK94 GAK-940000A0 Pneumatic type (with chain-off thread suction device)
AK102 GAK-A02000A0 Pneumatic type (for servomotor)
― PF-0552010-B0 Air regulator (F.R. unit asm.)
― GMD-01080000×2Fixing screw for F.R. unit asm.
― F1021-003-000 Tube connector (male)
― GAS-12063000
＊
One-touch connector
＊Selection parts instead of the tube connector
MC-7B ― Blower-type chain-off thread suction device + cloth chips
[Reference]
Combination table of “chain-off thread suction device” and
“auto-lifer” which correspond to “chain-off thread trimming device”.
Chain-off
thread
trimming
device
T043
Chain-off
thread
suction
device
Auto-lifter
MC-7B AK102
(JUKI servomotor)
＊―
AK94
(any motor will do)
＊AK94 is equipped with chain-off thread
suction device.
MC-38 AK102
(JUKI servomotor)
MC-39 ― (MC-39 is equipped with auto-lifter.)
＊The aforementioned devices are not equipped with air regulator.
Please purchase the following components when you need to regulate air pressure.
L124 MAL-124000A0 Blind stitch hemming attachment A ruler used for blind hemming in knits
MAL-125001A0 For 110, 115, 220, 240V
L125
MAL-125002A0 For 220, 380, 415, 440V
MAL-125001AA For 110, 115, 220, 240V
MAL-125002AA For 220, 380, 415, 440V
Automatic folded-
edge controlled
blind hemming
device
For flat
upper knife
For square
upper knife
Model Part No. Description Feature
The attachment automatically detects the overlapped section of a material.
Then, it makes the needle enter the material deeper to prevent stitch deviation.
H153 MAH-153000A0 Cloth edge guide ruler A swing type edge guide.
― 122-26155 Cloth plate Wider material can be sewn by attaching the cloth plate.
TR01 ― Small-diameter roller for rib attaching
TR02 ― Large-diameter cloth tensioner
Stitch type U.S.A Code
1-needle overlock 504 04
2-needle overlock 514 14
Type Code
Cylinder-bed C
Needle Overedging
gauge (mm) width (mm)
Feed dog Code
― 3.2 3-row 0D6
― 4.0 3-row 0E6
― 4.8 2-row 0F4
2.0 3.2 2-row BD4
2.0 3.2 3-row BD6
2.0 4.0 3-row BE6
Material Application
Special machine
Code
classification
Light- to
medium-weight
For general fabrics Runstitching Upper looper high throw 307
Pneumatic auto-lifter Code
Standard type AK102
Built-in synchronizer
Set speed Code
7,500rpm SY35
● AC SERVOMOTOR (SC-380)/Machine head
To Next Page
Loading...
Need help?
General
