MH-1410 (September, 2003) 2/2
WHEN YOU PLACE ORDERS
OPTIONS
MH1410 / /
Needle gauge
2-needle： 31.8mm (1-1/4")
2-needle： 34.9mm (1-3/8")
2-needle： 38.1mm (1-1/2")
4-needle：
6.4mm＋25.4mm＋6.4mm
(1/4"
＋
1"＋1/4")
Code
A
B
C
D
Code
AK122
Code
V072
Pneumatic auto-lifter
Not provided
provided
Cloth puller
Not provided
provided
＊The needle gauge that falls within the range from
4.8mm to 50.8mm is available.
Gauges other than those shown in the above table are
available on a special order.
✽ The V072 cannot be retrofitted to
your machine after the setup.
Designate one when placing
order for the machine.
Part No.
GAK-A22010B0
311-42565
311-43068
311-43167
311-41658
MAV-07236000
MAV-07237000
MAV-07240000
Model
AK122
―
―
―
―
―
―
―
Description
Pneumatic auto-lifter
(＊JUKI: The SC-380 or a commercially available needle positioning motor is required.)
Needle cooler (pneumatic type): For MH-1410A
Needle cooler (pneumatic type): For MH-1410B, MH-1410C
Needle cooler (pneumatic type): For MH-1410D
Brakedown folder bracket (asm.)
Top roller (made of iron)
Top roller (made of urethane)
Top roller cover (for urethan roller)
To Next Page
Loading...
Need help?
General
