JUKI Union Special MFC-7605 - User Manual

LIUKI
Finest Quality
2-3 Needle Cylinder Bed Coverseam Machine
MFC-7000A Series
REV.10/31/01
INSTRUCTION MANUAL
NOTE: Read safety instructions carefully and understand them
before using your MFC-7000.
Retain this Instruction Manual for future reference.
OP0113

Summary

Safety Rules

Operating Cautions

Operating Cautions (Continued)

Lubrication

Lubrication (Continued)

Inserting Needles

Threading the Machine

Threading the Machine (Continued)

Adjusting the Stitch Length

Differential Feed Mechanism

Presser Foot Pressure and Lifter

Roller Pressure Adjusting Knob

Puller Lifter Lever

Puller Stitch Length

Adjustment of Looper Gauge

Adjustment of Needle Bar Height

Adjustment of Looper and Needle

Adjustment of Needle Guard

Adjustment of Spreader

Adjusting Stroke

Adjust stroke by 19mm by loosening nut (L) and moving (M) back and forth.

Adjusting Position of Spreader

Adjust spreader height (10.5-0.5mm), position (left/right clearance 0.3-0.5mm) and front/back by loosening screws.

Adjusting Take-Up Cam

Looper Take-Up Adjustments

Center take-up cam (W) to slots in take-up plate. Set timing of cam for looper thread cast-off.

Adjustment of Thread Guide

Adjusting Needle Thread Strike Off

Maintenance

Cleaning the Machine Head

Changing Oil

JUKI Union Special MFC-7605 Specifications

General

Brand	JUKI
Model	Union Special MFC-7605
Category	Sewing Machine
Language	English