Need help?Do you have a question about the Julabo CORIO CP-1000F and is the answer not in the manual?
General| Temperature Range | -20°C to +100°C |
|---|---|
| Cooling Capacity at +20°C | 1000 W |
| Pump Capacity Pressure | 0.5 bar |
| Display | LED |
| Power Supply | 230 V / 50 Hz |
| Cooling Capacity | 1 kW |
| Heating Capacity | 1 kW |
| Heater Power | 2 kW |
| Pump Type | Pressure |
| Refrigerant | R134a |
| Interface | RS232 |
| Cooling Capacity at 0°C | 700 W |
| Cooling Capacity at -20°C | 300 W |
Explanation of warning symbols (DANGER, WARNING, CAUTION, NOTE) and their meanings.
Crucial safety guidelines for operating the device safely and preventing hazards.
Details the safety symbols affixed to the device and their importance.
Explains protective devices like high temperature cut-off and low liquid level protection.
Describes the general function and operational capabilities of the circulator.
Identifies and describes the physical controls and connection ports on the unit.
Explains how alarms and warnings are indicated and what actions to take.
Steps for setting up the device at its final installation site, ensuring proper placement.
Detailed steps for physically mounting the circulator onto a bath tank or cooling machine.
Instructions for connecting the circulator to the electrical power supply.
Guidelines for connecting external, closed-loop systems to the circulator.
How to set the high temperature cut-off to prevent overheating and ensure safety.
Instructions for filling the device with the appropriate bath fluid.
Procedure for powering on the device and initial startup sequence.
Instructions on how to properly shut down the device.
How to set and adjust the desired operating temperature setpoint.
Steps to initiate a temperature control application on the unit.
How to adjust the internal temperature sensor for improved accuracy.
Procedure to test the operational status of the high temperature safety function.
Steps to verify the correct operation of the low liquid level safety mechanism.
Details alarm and warning messages and their troubleshooting steps.
To Next Page
