Need help?Do you have a question about the Julabo CORIO CP-600F and is the answer not in the manual?
General| Cooling Capacity | 600 W |
|---|---|
| Pump Capacity Flow Rate | 15 L/min |
| Pump Type | Magnetic Drive Pump |
| Display | LED |
| Interface | RS 232 |
| Cooling Capacity at 0°C | 600 W |
| Cooling Capacity at -20°C | 0.3 kW |
| Heating Capacity | 1, 200 W |
| Pump Capacity Pressure | 0.35 bar |
| Power Supply | 230V, 50/60Hz |
Explains hazard symbols (DANGER, WARNING, CAUTION, NOTE) and their severity.
Provides essential safety instructions for operating the unit, covering hot surfaces, electric shock, and refrigerants.
Describes the built-in safety features like high temperature cut-off and low liquid level protection.
Identifies and describes the various controls, displays, and connection ports on the unit.
Provides detailed technical specifications, ambient conditions, and protection classes for the device.
Presents specific technical data for various refrigerated circulator models.
Guides on setting up the device at its installation location, including placement and clearances.
Details the steps for mounting the circulator onto a bath tank or cooling machine.
Instructions for connecting the circulator (heating or refrigerated) to the power supply.
Explains how to connect external systems to the unit's pump connections.
Guides on setting the high temperature cut-off to prevent overheating.
Step-by-step instructions for switching the unit on and preparing it for operation.
Instructions for safely switching off the device after use.
Describes how to set and change the desired setpoint temperature for applications.
Explains how to start a temperature control application directly on the unit.
Describes how to adjust the internal temperature sensor for improved accuracy.
To Next Page
