EasyManua.ls Logo

Julabo CORIO CD-200F User Manual

Julabo CORIO CD-200F
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Heating immersion circulator, open bath heating circulator,
refrigerated circulator
Original operating manual
1.950.0800.us.V11 12/2022

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Julabo CORIO CD-200F and is the answer not in the manual?

Julabo CORIO CD-200F Specifications

General IconGeneral
BrandJulabo
ModelCORIO CD-200F
CategoryLaboratory Equipment
LanguageEnglish

Summary

3 Intended use

4 Safety

4.1 Safety instructions

Essential safety guidelines to prevent injury and equipment damage.

4.3 Safety function

Details the built-in safety features and their operation.

5 Product description

5.3 Operating and functional elements

Identifies and describes all controls, displays, and ports on the unit.

5.4 Alarm messages

Interpreting and responding to device alarms and warnings.

5.5 Technical data

Comprehensive technical specifications and operating parameters.

5.5.2 Technical data for refrigerated circulators

Specific technical details for refrigerated circulator models.

6 Transport and installation

7 Initial operation

7.2 Connect the device to the power supply

Procedures for connecting the device to electrical power.

7.3 Connecting an external system

Guidance on integrating external temperature control systems.

7.4 Set high temperature safety function

Configuration of the adjustable high temperature cut-off feature.

7.5 Fill device

Instructions for filling the device with the appropriate bath fluid.

8 Operation

8.1 Switch on the unit

Step-by-step guide to powering on the circulator.

8.2 Switch off the unit

Safe procedures for powering down the circulator.

8.3 Configuring setpoint temperature

Setting and adjusting the target temperature for operation.

8.4 Start temperature control application

Initiating and managing temperature control processes.

8.9 Adjusting the temperature sensor (ATC)

Calibrating the temperature sensor for improved accuracy.

9 Maintenance

9.2 Check the functionality of high temperature cut-off

Testing the over-temperature safety cut-off mechanism.

9.3 Test the low liquid level safety function

Verifying the safety function for low bath fluid levels.

10 Disposal

Related product manuals