Need help?Do you have a question about the Julabo Corio C and is the answer not in the manual?
General| Pump Capacity | 15 l/min |
|---|---|
| Heating Capacity | 2 kW |
| Display | LED |
| Interface | RS232 |
| Power Supply | 230V/50Hz |
Importance and availability of genuine spare parts for optimal performance and safety.
Information on available accessories and where to find them on the JULABO website.
Explanation of warning signs and signal words used to indicate hazards and their severity.
Safety responsibilities of the company operating the device and its personnel.
Essential safety guidelines for the end-user operating the device.
Specific safety rules and precautions for operating the circulator safely.
Illustrates and explains hazard warning symbols and their associated meanings.
Details built-in safety features like overheating protection and low liquid level alarms.
General description of the circulators and their operating temperature range.
Identifies and explains the controls, displays, and ports of the device.
Explains the function of each key on the control panel for device operation.
Explains how alarms and warnings are indicated and how to respond.
Lists performance specs, environmental conditions, and protection classes.
Lists materials used in parts that may contact the bath fluid for compatibility checks.
Specifies the type, conductivity, and water-based fluids permitted for use.
Provides step-by-step instructions for safely moving the circulator.
Steps to properly connect the circulator to the mains power outlet.
Instructions for filling the bath tank with the correct amount of fluid.
Step-by-step guide to powering on the circulator and its display.
Procedure for safely powering down the circulator and stopping operations.
How to set and adjust the desired operating temperature for applications.
Instructions for initiating a temperature control process and application.
How to enable automatic startup after power interruptions or activation.
Guide to programming the duration of temperature control applications.
Procedure for calibrating the temperature sensor for improved accuracy.
Procedure for inspecting and maintaining the legibility of safety labels.
Procedure to verify the functionality of the low liquid level safety feature.
Instructions for safely replacing the detachable power cord.
Steps for draining the device and bath tank for service or disposal.
Guidelines for cleaning the circulator, bath tank, and cooling machine.
Instructions for storing the device safely in a dust-free, dry, frost-free location.
Contact information and procedures for obtaining technical assistance.
Steps for properly disposing of the circulator and cooling machine.
Lists and explains error codes, alarms, and warnings with solutions.
To Next Page
