EasyManua.ls Logo

Julabo Corio C - Safety Instructions; General Safety for Operating Company; General Safety for Operator

Julabo Corio C
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Safety
9
4 Safety
4.1 General Safety Instructions for the operating company
This section outlines the General Safety Instructions that must be observed by
the operator to ensure safe operation.
The operator is responsible for the qualifications of its operating personnel.
The operator must ensure that the operating personnel has been instructed
in use of the device.
The device operators must receive regular training about the dangers
involved in their work and measures to prevent such dangers.
The operator must ensure that persons entrusted with the operation,
installation and maintenance have read and understood the operating
manual.
The device may only be configured, installed, maintained and repaired by
trained personnel with appropriate qualifications.
If hazardous substances or substances that may become hazardous are
used, the device may only be used by personnel who are qualified to handle
these substances and the device.
The operator must ensure that the device is checked for safety and
functionality at regular and usage-related intervals.
The operator must ensure that the mains supply has a low impedance to
prevent influencing other devices powered by the same supply.
4.2 General Safety Instructions for the operator
This section outlines the General Safety Instructions that must be observed by
the user to ensure safe operation.
Read the operating manual before initial operation
The device may only be connected to mains power outlets with a protective
earth (PE)
The mains plug is a safe insulator of the power supply grid and must be
freely accessible at all times
Do not start the device if it has a damaged power cable
Do not operated damaged devices
Only mount the circulator in suitable bath tanks or refrigeration units
When connecting to external devices, observe the respective assembly
instructions, connection assignment of the plugs and technical data for the
products
Observe the safety symbols on the device.
Do not remove safety symbols
Have all service and repair work carried out by authorized specialists only

Other manuals for Julabo Corio C

Related product manuals