Julabo Corio C - Table of Contents

3
1 Foreword ............................................................................................ 5
2 About this manual ............................................................................. 6
2.1 Original JULABO spare parts ......................................................... 6
2.2 Accessories .................................................................................... 6
2.3 Warnings ........................................................................................ 6
2.4 Symbols used ................................................................................. 7
3 Intended use ...................................................................................... 8
4 Safety ................................................................................................. 9
4.1 General Safety Instructions for the operating company.................. 9
4.2 General Safety Instructions for the operator ................................... 9
4.3 General Safety instructions for device operation .......................... 10
4.4 Safety symbols ............................................................................. 11
4.5 Safety function ............................................................................. 11
5 Product description ........................................................................ 13
5.1 Product overview .......................................................................... 13
5.2 Operating and functional elements ............................................... 14
5.2.1 Key description ........................................................................ 15
5.3 Alarm messages........................................................................... 15
5.4 Technical data .............................................................................. 16
5.4.1 Material of parts that come into contact with the medium ....... 18
5.4.2 Bath fluids ............................................................................... 18
6 Transport and installation .............................................................. 20
6.1 Transporting the device ................................................................ 20
7 Initial operation ................................................................................ 21
7.1 Connect the device to the power supply....................................... 21
7.2 Fill device ..................................................................................... 21
8 Operation ......................................................................................... 23
8.1 Switch on the unit ......................................................................... 23
8.2 Switch off the unit ......................................................................... 23
8.3 Configuring setpoint temperature ................................................. 23
8.4 Start temperature control application............................................ 24
8.5 Activate autostart function ............................................................ 24
8.6 Setting the timer ........................................................................... 25
8.7 Adjusting the temperature sensor (ATC) ...................................... 26