Need help?Do you have a question about the Julabo CORIO CD-600F and is the answer not in the manual?
General| Cooling Capacity at +20 °C | 600 W |
|---|---|
| Temperature Stability | ±0.01 °C |
| Communication Interface | RS232 |
| Power Supply | 230 V / 50 Hz |
| Heating Capacity | 2 kW |
| Pump Pressure | 0.5 bar |
| Cooling capacity at 0 °C | 500 W |
| Cooling capacity at -20 °C | 200 W |
| Refrigerant | R-404A |
| Display | LED |
Essential safety instructions to prevent hazards and ensure safe operation.
Explanation of all safety symbols used in the manual for hazard identification.
Details on built-in protective devices and their operational mechanisms.
Introduction to the CORIO circulator series and their applications.
Identification and function of control panel buttons, display, and interfaces.
Comprehensive technical specifications including dimensions, performance, and ambient conditions.
Step-by-step instructions for physically attaching the circulator unit.
Guides for connecting heating and refrigerated circulators to power.
Instructions for connecting external circulation loops via various fittings.
Procedures for powering the device on, off, and standby modes.
How to configure and set the desired operating temperature for applications.
Methods for recording measurement data using a USB stick.
Procedures for checking safety symbols and functional safety mechanisms.
Instructions for emptying, cleaning, and storing the device properly.
Information on contacting technical support and warranty provisions.
Commands for remote control and parameter management via digital interface.
Detailed explanation of error codes, alarms, and warning messages.
To Next Page