Julabo CORIO CD-600F - IN Commands; OUT Commands

Appendix
55
11.1.1 IN commands
IN commands retrieve device parameters.
Process values System response
in_pv_00
Actual value
in_pv_01
Current variable (%)
in_pv_03
Current temperature of the temperature safety sensor
in_pv_04
Current setting of the high temperature safety function
Setpoints and warning
limits
System response
in_sp_00
Set setpoint temperature
Device modes System response
in_mode_05
Operating mode set for temperature control system:
0 = Stop
1 = Start
11.1.2 OUT commands
OUT commands set device parameters. Remote control mode must be active.
Parameter
settings
Parameter Setting
out_sp_00
xxx.xx Setting for the setpoint temperature
Device modes Parameter Setting
out_mode_05
x Start/stop command of the device in remote control
mode:
0 = Stop tempering
1 = Start tempering