Need help?Do you have a question about the Julabo FP51-SL and is the answer not in the manual?
General| Brand | Julabo |
|---|---|
| Model | FP51-SL |
| Category | Thermostat |
| Language | English |
Defines the purpose and limitations of the circulator for specific applications.
Describes the features and components of the circulator, including displays and interfaces.
Details precautions for safe operation, handling hazardous materials, and environmental conditions.
Specifies that only qualified personnel should perform configuration and maintenance.
Describes safety features and compliance with IEC standards for protection.
Lists additional safety functions like early warning, high/low temperature warnings.
Explains the meaning of different warning symbols and signal words used in the manual.
Explains the meaning of informational symbols like "Note!" and "Important!".
Identifies and describes the controls and displays on the front of the unit.
Identifies and describes the connectors and ports on the rear of the unit.
Explains the function of the OK, Return, and Up/Down keys for navigation and control.
Describes the keys used to access different menu functions like Warning, Setpoints, and Menu structure.
Details the use of the numeric keypad for entering values and decimal points.
Explains the function of the backspace key for correcting input on the LCD display.
Covers placement, ventilation, and initial setup requirements for the unit.
Discusses the types of bath fluids to use, their properties, and safety considerations.
Explains how to connect the unit for temperature control in closed external systems.
Describes the setup for temperature control in open external systems, including the use of a level adapter.
Details the correct procedure for connecting the unit to the mains power supply.
Explains how to switch on the unit and select the display language.
Describes how to select and start stored temperature programs.
Explains how to manage, create, and edit temperature programs.
Details how to adjust the pump's capacity using motor speed settings.
Lists various configuration options like Remote, Autostart, Language, and Unit settings.
Explains control types (internal/external) and related parameters like Selftuning and Dynamic.
Explains how to set up remote control using the serial interface.
Describes setting the setpoint via analog inputs like Pt100 or REG+E-PROG.
Configures parameters for internal temperature control using the unit's sensors.
Configures parameters for external temperature control using an external sensor.
To Next Page
