Operating manual
26
Operating manual
1. Use according to intended purpose
JULABO water baths have been designed for temperature application to specific fluids in a
bath tank.
food and luxury articles or pharmaceutical and medico-technical products.
Direct temperature application means: Unprotected contact of the object with
The water baths are operated via the splash-proof keypad. The implemented
microprocessor technology allows to s
indicated on the LED temperature display.
The PID temperature control adapts the heat supplied to the thermal
requirements of the bath.
The water baths conforms to the relevant requirements specified by
European guidelines.
The models TW8, TW12, TW20 provide a drain screw and handles for easy
2. Operator responsibility – Safety recommendations
The products of JULABO GmbH warrant a safe operation if installation, operation and
maintenance is carried out according to common safety regulations. This section informs you
about potential dangers that may arise from operating the circulator and also mentions the
most important safety precautions
The operator is responsible for the qualification of the personnel operating the units.
The operator should be constantly informed about the dangers involved with their job
activities as well as preventive actions.
Make sure all persons expected to carry out operation, installation and maintenance of
the unit read and understand the safety information and operating instructions.
When using hazardous materials, the circulator may only be operated by persons that are
absolutely familiar with these materials and the unit. These persons must be fully aware
of possible risks.
If you have any questions concerning the operation of your unit or the information in this
manual, please contact us!
Contact JULABO GmbH
Gerhard-Juchheim-Str. 1
77960 Seelbach / Germany
Tel. +49 (0) 7823 / 51-0
Fax +49 (0) 7823 / 24 91
info.de@julabo.com
www.julabo.com
To Next Page
Loading...