EasyManua.ls Logo

Julabo TW8 - 7 Operating Procedures; Power Connection

Julabo TW8
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Water Baths
41
English
Cooling installation / continuo water supply
Recommendation: for model TW8, TW12, TW20
For continuous water supply and counter-cooling
Order No. Description
8 970 415 Liquid level/cooling set
8 970 416 Cooling coil
Water bath protective media
We recommend the use of the "Aqua-Stabil" protective media to
eliminate the formation of algae, bacteria, and other micro-organisms.
Order No. Description
8 940 006 6 bottles 100 ml each
8 940 012 12 bottles 100 ml each
7. Operating procedures
7.1. Power connection
Caution:
ConnOnly connect the unit to a power socket with earthing contact
(PE protective earth)!
The power supply plug serves as safe disconnecting device from the line
and must be always easily accessible.
Never operate equipment with damaged mains power cables.
Regularly check the mains power cable for material defects.
We disclaim all liability for damage caused by incorrect line voltages!
Check to make sure that the line voltage matches the supply
voltage specified on the identification plate.
Deviations of ±10 % are permissible.

Table of Contents