Jump n Carry JNC770R User Manual

12 Volt Jump Starter & Power Supply
Charge the unit for 24 hours through the built-in charger upon opening the box,
charge after every use and charge before extended storage.
Pb
CONTAINS SEALED LEAD ACID BATTERY.
BATTERY MUST BE RECYCLED.
WARNING
Read these instructions completely before using the Jump-N-Carry and save them for
future reference. Before using the Jump-N-Carry to jump start a car, truck, boat or to
power any equipment, read these instructions and the instruction manual/safety
information provided by the car, truck, boat or equipment manufacturer. Following all
manufacturers’ instructions and safety procedures will reduce the risk of accident.
Working around lead-acid batteries may be dangerous. Lead-acid batteries release
explosive gases during normal operation, charging and jump starting. Carefully read and
follow these instructions for safe use. Always follow the specific instructions in this
manual and on the Jump-N-Carry each time you jump start using the Jump-N-Carry.
All lead-acid batteries (car, truck and boat) produce hydrogen gas which may violently
explode in the presence of fire or sparks. Do not smoke, use matches or a cigarette
lighter while near batteries. Do not handle the battery while wearing vinyl clothing
because static electricity sparks are generated when vinyl clothing is rubbed. Review all
cautionary material on the Jump-N-Carry and in the engine compartment.
Always wear eye protection, appropriate protective clothing and other safety equipment
when working near lead-acid batteries. Do not touch eyes while working on or around
lead-acid batteries.
Always store clamps in their holsters, away from each other or common conductors.
Improper storage of clamps may cause the clamps to come in contact with each other,
or a common conductor, causing the battery to short circuit and generate high enough
heat to ignite most materials.
Use extreme care while working within the engine compartment, because moving parts
may cause severe injury. Read and follow all safety instructions published in the vehicle's
Owner's Manual.
While the battery in the Jump-N-Carry is a sealed unit with no free liquid acid, batteries
being jump started with the Jump-N-Carry unit likely contain liquid acids which are
hazardous if spilled.
Failure to follow instructions may
cause damage or explosion,
always shield eyes. Read entire
instruction manual before use.
WARNING
Warning: This product contains chemicals,
including lead, known to the State of
California to cause cancer, birth defects
and other reproductive harm.
Wash hands after handling.

Jump n Carry JNC770R Specifications

General

Voltage	12V
Peak Amps	1700A
Cranking Amps	425A
Weight	18 lbs
Clamps	Heavy-duty
Battery Type	Lead Acid
Cables	2 AWG
Cable Length	68 inch

Summary

Safety Information

General Precautions for Use

Provides detailed safety advice and precautions for using the Jump-N-Carry and handling batteries, covering personal safety and equipment care.

Product Features

Battery Status Indication

Explains how to check the battery's state of charge using the voltage status display and its corresponding indicators.

Recharging the Unit

Details the process for recharging the Jump-N-Carry, including initial charging and ongoing maintenance to ensure optimal battery life.

Jump Starting Procedures

Pre-Use Safety Checks

Outlines essential pre-use checks for the clamps, cables, and unit to ensure safe and effective jump starting operations.

Device Functions and Performance

USB Power Ports

Describes the functionality and activation of the USB power outlets for charging small electronic devices.

LED Work Light Operation

Explains how to operate the integrated high-intensity LED work light for assistance in low-light conditions.

Temperature and Performance Factors

Discusses factors affecting the Jump-N-Carry's performance, including connection quality and the impact of ambient temperature.

Troubleshooting and FAQs

Battery Testing Procedure

Provides instructions on how to perform a load test on the battery to determine its condition and functionality.

Proper Storage Guidelines

Offers guidance on the proper storage of the Jump-N-Carry unit to maintain its condition and longevity.

Battery Handling and Disposal

Product Warranty Information

Obtaining Warranty Service

Details the warranty period, terms, and procedures for obtaining technical service or repairs for the product.