Thank you for purchasing the second-generation Jumper T8SG Multi-protocol Radio system. Jumper is proud to bring this
ground-breaking product to the market and would like to thank customers just like you and the community for making this
dream possible.
Please take a moment to read this quick start reference before using your new T8SG radio.
Happy flying!
-The T8SG Development team.
Many radio control models are equipped with powerful motors and sharp spinning propellers. Please exercise caution when
working on models. Ensure power is disconnected from your models and remove propellers when performing maintenance.
Do not operate the T8SG radio system under the follow conditions.
• During bad weather or high wind conditions such as rain, hail, snow, storms or electromagnetic events.
• During any conditions of limited visibility.
• In areas where people, property, powerlines, roads, vehicles or animals may be in present.
• If you are felling tired or unwell or under the influence of drugs or alcohol.
• If the radio or model appear to be damaged or not functioning correctly.
• In areas of high 2.4ghz interference or in locations where use of 2.4ghz radios is prohibited.
• When the battery is the T8SG or the model is too low to function.
The T8SG and T8SG Plus are shipped with Deviation TX software installed as standard. To download the latest Software
manual please visit https://www.jumper.xyz
To download the latest firmware for your radio please visit the Deviation TX website at the following link.
https://www.deviationtx.com
CAUTION!
The T8SG is shipped with the most stable firmware at the time of manufacture. Please only update
firmware if you are experienced and confident in updating system firmware. Incorrect updates may render
the radio inoperable.
To Next Page
Need help?
General
