JumpPro Xcite - STEP 5: ASSEMBLING THE ENCLOSURE POLES; Connect the bottom enclosure poles (R) to the upper enclosure poles (S).; Align the holes in the bottom enclosure poles with the holes in the top enclosure poles, fasten with the screws (T) using the screwdriver provided (O).

23 pages

To Next Page

To Previous Page

12. Tie all the black straps onto the top rails. Do not tie them to the springs. The trampoline pad is

now fitted and you have completed step 4.

WARNING: The trampoline MUST NOT be used during construction.

STEP 5: ASSEMBLING THE ENCLOSURE POLES

13. Connect the bottom enclosure poles (R) to the upper enclosure poles (S).

14. Align the holes in the bottom enclosure poles with the holes in the top enclosure poles, fasten

with the screws (T) using the screwdriver provided (O).