JUNCTEK
JDS8000 Series User’s Manual
Measurement function operation
Measurement mode: Click the switch button in the lower left corner of the
measurement mode to enable or disable the measurement function, ON
means ON, and OFF means OFF; in the measurement function, the coupling
time, gate time, and measurement mode can be modified; the frequency,
Positive pulse width, period, negative pulse width, period. As shown in Figure
3-9-30 below.
Counter mode: Click the switch button in the lower left corner of the counter
mode to turn on or turn off the counter function, display ON means on, and
display OFF means off; in the counter function, the coupling time can be
modified; the number of pulses of the signal can be measured. As shown in
Figure 3-9-31 below.
To Next Page
Loading...