Need help?Do you have a question about the JUNCTEK JDS8000 Series and is the answer not in the manual?
General| Amplitude resolution | 1mV |
|---|---|
| Output impedance | 50Ω |
| Power supply | 100-240 VAC, 50/60 Hz |
| Waveform types | Sine, Square, Pulse, Ramp, Noise, DC |
| Interface | USB |
Safety specifications and safe use guidelines for the instrument.
General overview of the JDS8000 series signal generator's capabilities.
Physical dimensions of the JDS8000 series signal generator.
Detailed technical specifications for JDS8000 series models.
Description and identification of controls and indicators on the front panel.
Description and identification of connectors and features on the rear panel.
Explanation of the instrument's LCD screen layout and elements.
Steps for powering on the instrument and initial checks.
Guide on generating standard waveforms like sine, square, and pulse.
Settings and operation for various modulation types (AM, FM, etc.).
Configuration options for frequency, amplitude, and duty cycle sweeps.
How to control instrument parameters using external voltage signals.
Using the instrument's measurement and counter functions.
Configuration options for sound, display, language, and system information.
Instructions for installing the JDS8000 control software on a computer.
Overview and usage of the Android mobile application.
Guide for using the iOS mobile application.
Steps to diagnose and resolve power-on or display issues.
Troubleshooting steps for low screen brightness.
Steps to diagnose and fix issues with waveform output.
To Next Page