Do you have a question about the Jung FTR231 and is the answer not in the manual?
Brand | Jung |
---|---|
Model | FTR231 |
Category | Thermostat |
Language | English |
Explains how to set a lower ECO temperature via a 230 V input, indicated by a green status LED.
Describes PWM control (factory setting) and two-point control, detailing their impact on temperature regulation.
Instructions on adjusting floor temperature with the control knob, including LED indications and temperature ranges.
How to check the current operating mode via the LED color (orange for frost protection, red for heating).
Procedure to switch the device to frost protection mode by holding the control knob for over 2 seconds.
How to enable or disable continuous LED indication during the active heating phase by interacting with the control knob.
Steps for setting control behavior (PWM or 2-point) and adjusting temperature limits using adjustment rings.