Jung Smart Visu Server - Create Wind Speed Limit Value Function

E-MAIL MESSAGING 22
1. Select Display 2-byte (floating point
off) [1] as value / status.
2. Select the group address [2] with the
designation wind speed.
3. Enter m/s as the unit[3] for the wind
speed.
4. Select values [4] from the pull-down
menu.
14. Creating the wind speed limit value email message
Now you can specify the parameters whose exceedance would result in an email message.
14.1 Creating the wind speed limit value function
First specify the wind speed limit value for whose exceedance you will receive an email under Functions.
4
5. Select Threshold [5] as a value / status.
6. Specify the required lower / upper
bound [6] and enter m/s as the unit.
The upper limit value could be, for
7. example, 18 m/s (equivalent to
65km/h).
1
2
3
6
1
2
4
3
5