E-MAIL MESSAGING 7
4.2 Creating the email messaging function
In the next stage you specify the general settings for the function. After this you will set a few basic settings.
1. Select a zone, for example first floor,
kitchen or guest bathroom in the
Areas & Functions tab under Areas [1].
2. Now, under Functions create the leak-
age email message [2].
3. Under Functions, select the leakage
email message [3] you have just cre-
ated.
4. Now, under Properties, specify a
description [4] and a function type.
5. For the function types, use the pull-
down menu [5] to first select message
and then email.
6. With Symbol [6] you can select the
symbol you want to use for the leak-
age email message.
2
3
4
7. Enter a description[7], e.g.: leakage
in bathroom.
8. Enter the email address [8] of the
required recipient in addition to the
CC and BCC recipients.
9. Last of all, enter an individual subject
and an individual message [9].
1
7
8
4
5
6
9
To Next Page
Loading...
