3130
Pusher lock (depending on model)
Depending on the model of your Junghans
radio-controlled watch you can block the T2
button. To do this, move the safety lever bet-
ween T1 and T2 downwards (in direction of
T2) until it engages and the red marking
becomes visible.
To restore all T2 functions, move the safety
lever upwards (in direction of T1).
Analogue display: Hours, minutes, seconds
LC display:
Date, reception indicator, current hour of adjusted time zone, power control
display (if the power level is too low, the second hand stops at the 12 o'clock
position, the current LC display and the letters flash alternately. In addition,
the seconds can be displayed on the LCD.
Button T1
– Date
– Reception indicator
– Manual transmitter call
Button T2
– Current hour (adjusted time zone)
– Time zone adjustment
from + 10 hours to – 13 hours
CET or CEST setting
(reset function for DCF 77 local time
by pressing button for more than
3 seconds).
To Next Page
Loading...
