To Next Page

To Previous Page

03.11.GB

Lifting

Before collecting a load, the driver must ensure that it is correctly palletised and that the capacity of

the truck is not exceeded.

Do not lift long loads at an angle.

– Fully insert the truck and the load handler underneath the load.

– Press handle (3) in direction “H”.

– Lift the load fork by moving the tiller (2) up and down, until the desired lifting height is achieved.

o Fast lift

Rapid lift is effective for loads of up to 120 kg. For pallets over 120 kg, rapid lift is applied for the

distance under the pallet. As soon as the load is raised, the truck switches to normal lift.

Lowering

– Press handle (3) in direction “S” to lower the load.

– Set the handle (3) to the “neutral” position.

When moving a laden truck, the handle (3) must be in the “neutral” (4) position.

1.2 Parking the truck securely

Do not park the truck on slopes and always lower the forks fully.

When transporting the truck on a lorry or trailer, it must always be loaded correctly with chocks applied

to the wheels.