109
08.11 EN
6.17 Temperature control system
WARNING!
In each case the cause of the overheating must be established and rectified by a
trained and authorised customer service engineer.
The warning indicator (94) goes on and an
audible warning is sounded when the
permissible coolant temperature is
exceeded. The truck will only travel for
another 30 seconds, after which the drive is
automatically switched to neutral.
As soon as the permissible coolant
temperature is exceeded, proceed as
follows:
Procedure
• Remove the truck from the hazardous
area if necessary,
• Lower the fork carriage and load
securely.
• Switch the drive to neutral and apply the
parking brake.
• Run the motor at a slightly higher speed
(to improve the cooling effect of the fan)
until the temperature drops back to the
normal level.
Z If the temperature does not drop, park the
truck securely, switch the motor off and
have the truck examined.
Z In acutely hazardous situations, after the
30 second residual travel period, the truck
can be operated again for a further 30
seconds by switching off the ignition and
starting the engine again.
94
94
To Next Page
Loading...
Need help?
General
