Hydraulic function lock parameters
No. Function Range Standard
setting
Comments
5
,
6
2338 Lifting,
lowering
0 - 15 1 0 = Lifting and lowering always
released
1 = Lifting only with authorisation
2 = Lifting only when stationary
3 = Lifting only with authorisation
and only when stationary
4 = Lowering only when stationary
5 = Lifting and lowering only with
authorisation
6 = Lifting only when stationary,
lowering only with authorisation
7 = Lowering only with
authorisation, lowering only with
authorisation
8 = Lowering only when stationary
9 = Lifting only with authorisation,
lowering only when stationary
10 = Lifting and lowering when
stationary
11 = Lifting only with authorisation
and only when stationary,
lowering only when stationary
12 = Lowering only with
authorisation and only when
stationary
5)
With release = with tiller in travel range (F) in pedestrian mode; in rider mode also with operator platform occupied
6)
Stationary = no travel operations
138
04.19 en-GB
To Next Page
Loading...
Need help?
General
