Jungheinrich EJC M10 - User Manual

Jeffrey ParkerAug 3, 2025

What to do if my Jungheinrich EJC M10 Forklifts truck does not start?

D
David LucasAug 3, 2025
If your Jungheinrich Forklifts truck won't start, several factors could be at play. First, make sure the battery connector is securely plugged in. Next, verify that the key switch is in the "I" position. A low battery charge could also be the culprit, so check the battery level and charge it if needed. Ensure the control handle is set to the travel zone (F). Also, examine fuse 1F1 for any faults. Finally, if the on-board charger is connected, disconnect it from the mains.

Summary

A Correct Use and Application

Proprietor Responsibilities

Defines the role and obligations of the truck's owner/user for safe operation and compliance.

Attaching Accessories

Guidelines for adding external equipment, including permission requirements and local authority approval.

B Description

Application

Details the EJC M10 as a pedestrian stacker for lifting and transporting palletised goods on level floors.

Assemblies

Identifies key components of the EJC M10 truck with a visual diagram and numbered parts list.

Technical Specifications

Lists performance data, dimensions, and technical characteristics of the EJC M10 truck.

EN Norms and Conditions of Use

Covers noise emissions, electromagnetic compatibility (EMC), and operational ambient temperature limits.

Identification Points and Data Plates

Locates and describes various identification markings and data plates on the truck.

C Transport and Commissioning

Lifting by Crane

Instructions for safely lifting the truck using crane lifting gear and attachment points.

Securing the Truck for Transport

Procedures for securely fastening the truck onto a lorry or trailer using tensioning belts.

Initial Truck Setup

Steps for preparing the truck after delivery or transport, including battery installation and charging.

Emergency Operation

Method for moving the truck manually when its drive system is non-operational due to a fault.

D Battery Maintenance, Charging & Replacement

Safety Regulations for Battery Handling

Essential safety precautions for handling acid batteries, including fire protection and personal protective equipment.

Battery Types and Exposure

Information on standard battery types and procedures for accessing the battery compartment.

Battery Charging Procedures

Detailed steps for charging the truck's battery using the on-board charger and understanding LED indicators.

Charging with Stationary Charger

Instructions for charging the battery using an external stationary charging station.

Battery Removal and Installation

Step-by-step guide for safely removing and installing the truck's battery.

Battery Charge;Discharge Indicator

How to read the indicator that displays the battery's current charge level.

E Operation

General Operation Safety Regulations

Rules for safe truck operation, including driver authorisation, responsibilities, and hazardous areas.

Controls and Displays Overview

Identification and function of the truck's various controls, switches, and display instruments.

Starting Up the Truck

Daily checks and procedures required before operating the truck and how to switch it on.

Industrial Truck Operation Guidelines

Rules for using the truck in work areas, travel conduct, visibility, and load handling.

Travel, Steering, and Braking

How to control the truck's movement, direction, and stopping mechanisms.

Lifting and Depositing Loads

Steps for safely lifting and lowering load units, including slow lowering control.

Emergency Lowering and Parking

Procedures for emergency lowering and securely parking the truck.

Travel Parameters and Display

Information on adjustable travel settings and the truck's display instrument (CanDis).

Troubleshooting Guide

Identifies common faults and their solutions, guiding users to resolve operational issues.

F Industrial Truck Maintenance

Maintenance Safety and Environmental Protection

Safety measures and environmental considerations for performing truck servicing and inspections.

General Maintenance Notes

Important guidelines on using genuine parts, handling fluids, and specific component maintenance.

Servicing and Inspection Intervals

Outlines the schedule and importance of regular servicing and inspections for truck reliability.

Maintenance Checklist

A detailed list of tasks and intervals for routine maintenance checks on various truck systems.

Lubrication Schedule

Specifies the lubrication points, types of lubricants, and quantities required for maintenance.

Consumables Identification

Lists necessary consumables, their order numbers, quantities, and intended uses.

Maintenance Preparation and Access

Instructions for preparing the truck and removing access panels for maintenance tasks.

Recommissioning and Decommissioning

Steps for restoring a serviced truck to operation and procedures for taking it out of service.

Post-Maintenance Checks and Disposal

Safety tests after repair, returning to service, and final disposal guidelines.

Jungheinrich Traction Battery Instructions

EPzS and EPzB Traction Batteries

Information on Jungheinrich traction batteries with positive tubular plates, including type plates and refilling systems.

EPzS;EPzB Battery Rating Data and Safety

Details the technical specifications and safety requirements for EPzS/EPzB battery models.

EPzS;EPzB Battery Commissioning and Operation

Guidelines for commissioning, discharging, and charging EPzS/EPzB batteries.

EPzS;EPzB Battery Maintenance and Storage

Routine maintenance, cleaning, storage advice, and malfunction handling for EPzS/EPzB batteries.

Battery Type Plate and Refilling System

Explanation of the battery type plate information and details on the Aquamatic/BFS water refilling system.

Water Refilling System Operation

Provides details on the design, application, function, and operational parameters of the refilling system.

EPzV and EPzV-BS Traction Batteries

Information on maintenance-free Jungheinrich traction batteries with positive tubular plates.

EPzV;EPzV-BS Battery Rating Data and Safety

Technical specifications and critical safety requirements for maintenance-free EPzV/EPzV-BS batteries.

EPzV;EPzV-BS Battery Commissioning and Operation

Procedures for commissioning, discharging, and charging EPzV/EPzV-BS batteries.

EPzV;EPzV-BS Battery Temperature and Electrolyte

Information on optimal operating temperature, electrolyte properties, and maintenance for EPzV/EPzV-BS batteries.

EPzV;EPzV-BS Maintenance and Storage

Routine maintenance, cleaning, storage, and malfunction handling for EPzV/EPzV-BS batteries.

EPzV;EPzV-BS Battery Malfunctions and Type Plate

Guidance on handling malfunctions and understanding the type plate for EPzV/EPzV-BS batteries.

Brand	Jungheinrich
Model	EJC M10
Category	Forklifts
Language	English

Brand

Jungheinrich

Model

EJC M10