Need help?Do you have a question about the Jungheinrich EJC 216 and is the answer not in the manual?
General| Load Capacity | 1600 kg |
|---|---|
| Overall Width | 800 mm |
| Battery Voltage | 24 V |
| Battery Capacity | 375 Ah |
| Drive | Electric |
| Power Type | Battery |
| Travel Speed (loaded/unloaded) | 6 km/h / 6 km/h |
Presents detailed performance specifications for different EJC models.
Comprehensive safety regulations for battery maintenance, charging, and disposal.
Details safety precautions and procedures for charging the battery.
General safety rules for operating forklift trucks, including driver authorization.
Comprehensive daily inspection checklist for safe truck operation.
General safety rules for operating the industrial truck.
Explains the function and safe use of the emergency disconnect switch.
Warns about tipping hazards if load center of gravity is outside specified limits.
Lists possible causes and actions for when the truck fails to start.
Lists possible causes and actions when the load cannot be lifted.
Safety warnings and procedures for emergency lowering of the load handler.
Procedure for setting truck parameters using CanCode.
Procedure for setting charger characteristics for specific ELH models.
Safety rules and recommendations for maintenance operations.
Regulations and responsibilities for maintenance and repair personnel.
Safety measures and preparations required before performing maintenance.
Procedure for checking and topping up the hydraulic oil level.
Procedure for checking and replacing electrical fuses.
Lists maintenance parts and their replacement intervals.
Details maintenance tasks for the owner.
Lists customer service maintenance tasks for standard equipment.
Safety rules for handling batteries, including waste disposal and personal protection.
Critical safety warnings about explosion risks during charging.
To Next Page