What to do if my Jungheinrich Forklifts truck cannot be switched on?
If your Jungheinrich Forklifts truck won't switch on, start by ensuring the battery connector is properly inserted and the battery cable is securely attached. If that's not the issue, check that the main switch is latched. Also, verify that the key switch is in the "I" position, and inspect the fuses for any faults.
General| Brand | Jungheinrich |
|---|---|
| Model | ETM/V 216 |
| Category | Forklifts |
| Language | English |
Safety guidelines for assembly and commissioning of hoist frames, emphasizing manufacturer-trained personnel.
Rules for safe operation of forklift trucks, driver authorization, and unauthorized use.
Guidelines for safe driving, work areas, inclines, elevators, and load composition.
Procedure for emergency steering operation in case of electrical failure.
Procedures for modifying truck parameters affecting performance and behaviour.
Guidance on identifying and resolving common truck faults and issues.
Requirements for maintenance personnel, lifting, jacking, and cleaning.
Defines operator responsibilities for safe and correct use of the machine.
Provides standard technical specifications, performance data, and dimensions.
Critical safety instructions for assembly, commissioning, and driver training.
Essential safety rules for handling acid batteries, including fire protection and disposal.
Procedure for emergency unlocking of the battery trolley if the normal mechanism fails.
To Next Page