Juniper AX411 - User Manual

AX411 Access Point Connection Overview
To establish a wireless LAN using AX411 Access Points, you connect the access point
to the SRX Series device and to a power source, as shown in Figure 1.
Figure 1: AX411 Access Point Basic Connections
g033103
Omit power supply if
connecting access point
to Power over Ethernet
(PoE) port.
Table 1 describes the connections.
Table 1: AX411 Access Point Basic Connections
For More InformationConnection
Installing the AX411 Access Point Antennas
Connecting External Antennas to the AX411 Access Point
Access point antennas
Connecting the AX411 Access Point to the SRX Series
Device
Ethernet connection to SRX
Series device
AX411 Access Point Connection Overview ■ 1

Juniper AX411 Specifications

General

Brand	Juniper
Model	AX411
Category	Wireless Access Point
Language	English

Summary

AX411 Access Point Connection Overview

Access Point Antennas

Details on how to connect and install antennas for the AX411 Access Point.

Ethernet Connection to SRX Series Device

Instructions for establishing an Ethernet link between the AX411 Access Point and the SRX Series device.

Connection to a Power Source

Information on supplying power to the AX411 Access Point via PoE or a power supply unit.