Need help?Do you have a question about the Juniper WLA Series and is the answer not in the manual?
General| Brand | Juniper |
|---|---|
| Model | WLA Series |
| Category | Wireless Access Point |
| Language | English |
Overview of the WLA532E hardware features, capabilities, and specifications.
Overview of the WLA532E access point's design and physical features.
Details on the performance capabilities and supported features of the access point.
Dimensions, weight, and physical characteristics of the access point.
Different methods and kits for mounting the access point physically.
Software and compatible hardware for configuring and operating the access point.
Lists and describes the supported antenna models for the access point.
How to configure external antennas for optimal performance.
Explains the meaning of the status LEDs on the access point.
Details MAC address assignment for WLA series access points.
Guidance and checklists for preparing the site for access point installation.
Checklist of tasks for preparing a site for access point installation.
General guidelines for selecting and preparing the installation site.
Environmental conditions required for proper access point operation.
Guidance on using RingMaster for planning WLAN deployment.
Safety precautions and warnings for handling and installing the device.
General safety precautions and warnings for handling the device.
Warning that only trained personnel should install or replace the device.
Information on EMC and compliance with electromagnetic standards.
Compliance details related to medical safety standards.
Notice that the device has no user-serviceable parts.
Instructions on how to dispose of the product safely and legally.
Technical requirements and specifications for the access point radios.
Detailed specifications for the 2.4-GHz radio.
Detailed specifications for the 5-GHz radio.
Agency approvals and compliance standards for the access point.
List of agency approvals and certifications for the product family.
Compliance with IEEE 802.11 standards and features.
Guidelines for radio frequency exposure and safety.
Step-by-step instructions for installing and connecting the access point.
Warning to read installation instructions before connecting power.
Steps for unpacking the access point and checking contents.
Details of items included in the access point package.
Step-by-step guide for mounting on a suspended ceiling rail.
Steps for installing using the plenum bracket kit for concealed mounting.
Guide for installing using a legacy adapter on a ceiling rail.
Steps for wall mounting using the WLA-BRKT-WALL kit.
Steps for wall mounting using the EU faceplate kit.
Steps for wall mounting using the NA faceplate kit.
Instructions for connecting the access point to WLCs.
How to check the access point's operational status using its LEDs.
How to check the access point's operational status using its LEDs.
Information on customer support and contacting JTAC.
Information on contacting JTAC for support or missing parts.
To Next Page
