Juniper WLA Series User Manual

To install the access point on the wall:
1. Hold the faceplate centered over an existing NA standard outlet box (see Figure 42
on page 74) that has an installed Category 5 cable.
Figure 42: NA Standard Outlet Box
2. Secure the faceplate to the outlet box using the two provided 6-32 flat-head, flat-tip
screws and a screwdriver (see Figure 43 on page 75).
Copyright © 2012, Juniper Networks, Inc.74
WLA532E Access Point Hardware Documentation

Juniper WLA Series Specifications

General

Brand	Juniper
Model	WLA Series
Category	Wireless Access Point
Language	English