Juniper WLA Series User Manual

Figure 16: Securing the Locked Plenum Bracket Using the Provided M4
Screws
10. In order for the WLA532E plenum bracket to meet seismic safety standards you must
mount the plenum bracket directly to ceiling rails by securing the two provided sheet
metal self-threading screws into the openings on the plenum bracket (see Figure 17
on page 56).
Figure 17: Securing the Plenum Bracket to the Ceiling Rail Using Sheet
Metal Self-Threading Screws
Related
Documentation
Installing the WLA532E Access Point on a Ceiling Rail on page 46•
• Installing the WLA532E Access Point on a Ceiling Rail Using the Trapeze Legacy
Mounting Bracket Adapter Kit on page 57
Copyright © 2012, Juniper Networks, Inc.56
WLA532E Access Point Hardware Documentation

Juniper WLA Series Specifications

General

Brand	Juniper
Model	WLA Series
Category	Wireless Access Point
Language	English