CHAPTER 7
Installing and Connecting the Access Point
•
Installation Instructions Warning on page 43
•
Unpacking a WLA532E Access Point on page 44
•
Parts Inventory (Packing List) for a WLA532E Access Point on page 44
•
Installing the WLA532E Access Point on a Ceiling Rail on page 46
•
Installing the WLA532E Access Point Using the Plenum Bracket Kit on page 51
•
Installing the WLA532E Access Point on a Ceiling Rail Using the Trapeze Legacy
Mounting Bracket Adapter Kit on page 57
•
Installing the WLA532E Access Point on the Wall Using the WLA-BRKT-WALL
Wall-Mount Kit on page 64
•
Installing the WLA532E Access Point on the Wall Using the WLA-GNGWLBX-ADP-EU
Wall-Mount Kit on page 70
•
Installing the WLA532E Access Point on the Wall Using the WLA-GNGWLBX-ADP-NA
Wall-Mount Kit on page 72
•
Connecting the Access Point to Wireless LAN Controllers on page 76
Installation Instructions Warning
This topic applies to hardware devices in the Wireless LAN Access Point WLA Series
product family. For a complete list of safety guidelines and warnings and detailed
compliance information, see the Juniper Networks Regulatory Guide in the Wireless LAN
Services (WLS) documentation at Wireless LAN Services (WLS) Product Documentation.
WARNING: Read the installation instructions before you connect the device
to a power source.
Waarschuwing Raadpleegde installatie-aanwijzingenvoordatuhetsysteem
met de voeding verbindt.
Varoitus Lue asennusohjeet ennen järjestelmän yhdistämistävirtalähteeseen.
Attention Avantde brancherlesystèmesur la sourced'alimentation,consulter
les directives d'installation.
43Copyright © 2012, Juniper Networks, Inc.
To Next Page
Loading...
Need help?
General
