Juniper WLA Series - Figure 27: Orienting the Installed WLA532 E Antennas; Figure 28: Aligning the Access Point with the Ceiling-Mount Bracket

Figure 27: Orienting the Installed WLA532E Antennas
14. Align the access point with the ceiling-mount bracket. See Figure 28 on page 62.
Figure 28: Aligning the Access Point with the Ceiling-Mount Bracket
15. Push up and forward until the access point locks into place. See Figure 29 on page 63
Copyright © 2012, Juniper Networks, Inc.62
WLA532E Access Point Hardware Documentation