Juniper J-Series Getting Started Guide

■ Copper Gigabit Ethernet ePIM (1 port)
■ ADSL 2/2+ Annex A PIM (1 port)
■ ADSL 2/2+ Annex B PIM (1 port)
■ Dual-Port E1 PIM
■ E3 PIM (1 port)
■ DS3 (T3) PIM (1 port)
■ Dual-Port Fast Ethernet PIM
■ Dual-Port Channelized T1/E1/ISDN PRI PIM
■ 4-port Fast Ethernet ePIM
■ G.SHDSL PIM (2 ports)
■ 4-port ISDN BRI S/T or U PIM
■ Dual-Port Serial PIM
■ Dual-Port T1 PIM
■ TGM550 Telephony Gateway Module
■ TIM510 E1/T1 Telephony Interface Module (1 port)
■ TIM514 Analog Telephony Interface Module (4 ports)
■ TIM521 ISDN BRI Telephony Interface Module (4 ports)
J-series Software Features and Licenses
J-series Services Routers provide the software features listed in Table 5 on page 7.
You must purchase a separate software license to obtain some software features.
For more information about licenses, see “Installing and Managing J-series
Licenses” on page 161.
Table 5: Summary of J-series Features and License Requirements
Separate LicenseJ-series FeatureFeature Category
IPv4
Internet Protocols
IPv6 routing and forwarding
J-series Software Features and Licenses ■ 7
Chapter 1: Overview of Services Routers

Juniper J-Series Specifications

General

Brand	Juniper
Model	J-Series
Category	Network Router
Language	English