Need help?Do you have a question about the Juniper J2320 and is the answer not in the manual?
General| Product Series | J-series |
|---|---|
| Product Type | Router |
| Form Factor | Desktop |
| Platform | J2320 |
| Total Ports | 4 |
| Connectivity Technology | Wired |
| Network / Transport Protocol | TCP/IP, UDP/IP |
| Operating System | JUNOS |
| Data Link Protocol | Ethernet, Fast Ethernet |
| Routing Protocol | OSPF, BGP, RIP |
| Remote Management Protocol | SNMP |
| Features | Firewall protection, VPN support, NAT support, VLAN support, Quality of Service (QoS) |
| Compliant Standards | IEEE 802.1Q |
| Power Supply | AC 120/230 V (50/60 Hz) |
| Dimensions (H x W x D) | 1.75 x 17.5 x 10.5 in |
| Expansion Slots | 2 |
Overview of the guide's scope and purpose, covering installation, configuration, and basic connectivity.
Identifies the intended readers for this guide, including network administrators and IT professionals.
Instructions on navigating and utilizing the documentation effectively for various tasks.
Introduces J-series Services Routers, their capabilities, and user interfaces (J-Web and CLI).
Details the hardware features and components of the J2320, J2350, J4350, and J6350 Services Routers.
Describes Physical Interface Modules (PIMs) and Avaya VoIP modules supported by the routers.
Provides an introduction to the J-Web interface and the JUNOS command-line interface (CLI).
Covers site preparation, rack requirements, environmental tolerances, and safety for router installation.
Details the procedures for unpacking, installing, connecting power, and cabling the Services Router.
Guides through initial configuration steps, network settings, and connecting to the router.
Explains how to configure secure web access (HTTP/HTTPS) using J-Web or CLI for router management.
Covers purchasing, installing, and managing software licenses for J-series router features.
Instructions for replacing field-replaceable units (FRUs) like PIMs, compact flash, DRAM, and power supplies.
Covers common hardware issues, alarm conditions, and troubleshooting steps for chassis components.
Guides on locating serial numbers, contacting JTAC, and procedures for returning hardware.
Details pinout information for various network cables and connectors used with router interfaces and modules.
Outlines safety warnings, guidelines, agency approvals, and compliance statements for the Services Router.
To Next Page
