J-series™ Services Router Quick Start
12 October 2007
Part Number: 530-021980-01
Revision 1
J-series Services Routers provide IP routing, WAN and LAN connectivity, and
management services. Available in several models, Services Routers typically connect
small, branch, or regional offices to a central site, and link Internet service provider
(ISP) networks.
The J-series Services Router Quick Start provides instructions to initially set up J2300,
J2320, J2350, J4350, and J6350 Services Routers. You need no previous JUNOS
software experience, but must have managed a network and configured other routers.
For more information, see the J-series documentation at http://www.juniper.net/techpubs.
Contents
What You Need To Know ................................................................................3
Management IP Address ...........................................................................3
J-Web Access ............................................................................................3
CLI Console Access ...................................................................................3
Required Licenses .....................................................................................3
Slot Numbers ............................................................................................4
Interfaces and Ports ..................................................................................4
Remote Access .........................................................................................4
Before You Begin .............................................................................................4
Installing a Services Router .............................................................................6
Installing J2300 Services Routers ..............................................................6
Installing J2320 and J2350 Services Routers .............................................6
Installing J4350 or J6350 Services Routers ................................................8
Connecting Power to a Services Router ...........................................................8
Basic Connection and Configuration with the J-Web Interface .........................9
Step 1. Connecting, Logging In, and Starting the J-Web Interface .............9
Step 2. Updating the Software with the J-Web Interface ..........................10
■ 1
To Next Page
Need help?
General
