Juniper PTX10008 User Manual

Quick Start Guide
PTX10008 Packet Transport Router
IN THIS GUIDE
PTX10008 System Overview | 1
Step 1–Prepare the Site | 2
Step 2–Unpacking the PTX10008 | 4
Step 3–Mount the Chassis in the Rack | 6
Step 4–Install the Line Cards | 11
Step 5–Install the Front Panel | 14
Step 6–Connect Power to the Chassis | 19
Step 7–Connecting to the Network | 41
Step 8–Perform the Initial Configuration | 42
Safety Warnings Summary | 44
PTX10008 System Overview
NOTE: The PTX10008 Quick Start is designed to get your new router up and running in short order. For a full
description of all the components, the specifications, and unabridged installation instructions, see the PTX10008
Packet Transport Router Hardware Guide.
The Juniper Networks PTX10008 Packet Transport Router enables cloud and data center operators to smoothly transition
from 10-Gigabit and 40-Gigabit Ethernet networks to 100-Gigabit and 400-Gigabit Ethernet high-performance networks.
This flexible, 13 rack unit (13-U) modular chassis has eight line card slots that can support a maximum of 1152 10-Gigabit

Juniper PTX10008 Specifications

General

Slots	8
Operating System	Junos OS
Product Type	Core Router
Form Factor	Chassis
Rack Units	8U
Throughput	6.4 Tbps
Power Supply	AC or DC
Cooling	Redundant fan trays
Operating Temperature	0 to 40 °C
Interfaces	100GbE
Max Number of Ports	288 x 100GbE or 96 x 400GbE

Summary

PTX10008 System Overview

Step 1-Prepare the Site

Rack-Mount Requirements

Specifies rack dimensions, weight capacity, and clearance for installing the PTX10008 chassis.

Power Requirements

Details AC, DC, HVAC, and HVDC power configurations, supplies, and cable needs for the router.

Cooling and Maintenance Requirements

Outlines clearance requirements for airflow and hardware maintenance around the PTX10008 chassis.

Step 2-Unpacking the PTX10008

Step 3-Mount the Chassis in the Rack

Install the Mounting Hardware

Guides on installing left base, right base, and rear brackets for chassis mounting in a four-post rack.

Mount the PTX10008 in a 4-Post Rack Using a Mechanical Lift

Details the procedure for lifting and securing the PTX10008 chassis into a rack using a mechanical lift.

Step 4-Install the Line Cards

Step 5-Install the Front Panel

Step 6-Connect Power to the Chassis

Ground the PTX10008

Explains how to connect the chassis to earth ground for safety and proper operation, including AC-powered exceptions.

Install AC Power Supplies (JNP10K-PWR-AC)

Details the installation of JNP10K-PWR-AC power supplies, including tools and procedures.

Install AC/HVAC/HVDC Power Supplies (JNP10K-PWR-AC2)

Guides on installing JNP10K-PWR-AC2 power supplies, covering their high-capacity features and dual feeds.

Install DC Power Supplies (JNP10K-PWR-DC)

Covers installing hot-removable JNP10K-PWR-DC power supplies, including safety and connection procedures.

Install Dual DC Power Supplies (JNP10K-PWR-DC2)

Explains the installation of JNP10K-PWR-DC2 power supplies, featuring dual housings and redundant inputs.

Step 7-Connecting to the Network

Step 8-Perform the Initial Configuration

Safety Warnings Summary