To Next Page
R
randy99Jul 26, 2025
Why is my Juniper ACX5048 Network Router showing a high disk usage alarm?
- KKevin WilliamsJul 26, 2025
A predefined alarm on your Juniper Network Router might be triggered by high disk usage.
Why is my Juniper ACX5048 Network Router showing a high disk usage alarm?
A predefined alarm on your Juniper Network Router might be triggered by high disk usage.
Why is my Juniper Network Router showing a missing rescue configuration alarm?
A predefined alarm on your Juniper Network Router might be triggered by a missing rescue configuration.
Why is my Juniper ACX5048 Network Router showing a chassis alarm?
A chassis alarm on your Juniper Network Router is triggered by a physical condition, such as a power supply failure or excessive component temperature. You should follow appropriate troubleshooting steps for hardware issues.
What does a minor (yellow) alarm mean on my Juniper ACX5048 Network Router?
A minor (yellow or amber) alarm on a Juniper Network Router signals a noncritical condition that could lead to service interruption or performance degradation if ignored. It may also indicate a missing rescue configuration. Monitoring or maintenance is required to address the underlying issue.
Why is my Juniper Network Router showing a system alarm?
A system alarm on your Juniper Network Router can be triggered by several factors: a missing rescue configuration, failure to install a license for a licensed software feature, or high disk usage. You should address the specific condition that triggered the alarm.
General| Model | ACX5048 |
|---|---|
| Category | Network Router |
| Form Factor | 1U |
| Switching Capacity | 1.44 Tbps |
| Mounting | Rack-mountable |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Power Supply | Dual redundant AC or DC power supplies |
| Power Consumption | 300 W |
| Management | CLI, SNMP |
Information on obtaining documentation and release notes.
Explains conventions used in the documentation for clarity.
How to provide feedback to improve the documentation.
Information on how to get technical assistance from Juniper Networks.
Covers system overview, architecture, models, FRUs, and protocols.
Details chassis components, panels, and status LEDs.
Explains cooling system, airflow, and fan module details.
Describes AC and DC power supplies and their components.
Covers site preparation checklists, guidelines, and environmental specs.
Details power specifications and cord requirements.
Describes specifications for router ports and interfaces.
Provides detailed cable specifications and fiber-optic loss information.
Steps to unpack the router and verifying components.
Guides for installing, connecting, and mounting the router.
Procedures for connecting the router to AC, DC power, and earth ground.
Instructions for connecting to management consoles and networks.
Steps for initial router configuration via CLI.
Procedures for powering off and removing the router.
Instructions for installing and removing fan modules.
Steps for installing and removing power supplies.
Procedures for removing and installing transceivers.
Guidelines for maintaining and replacing fiber-optic cables.
How to contact Juniper Networks customer support for assistance.
Methods to find serial numbers for router components.
Instructions for packing and returning components for repair.
Explains alarm terms, definitions, types, and severity levels.
General safety and warning guidelines for device operation.
Fire safety requirements and recommendations for equipment.
Warnings related to laser radiation and product safety.
Safety precautions for installation and maintenance procedures.
Safety information regarding power supply and electrical connections.
Statements on agency approvals and compliance with standards.
