Related
Documentation
Interface Alarm Messages•
• show chassis alarms
• show system alarms
ACX5000 Router Interface Alarm Messages
Interface alarms are alarms that you configure to alert you when an interface is down.
To configure an interface link-down condition to trigger a red or yellow alarm, or to
configure the link-down condition to be ignored, use the alarm statement at the [edit
chassis] hierarchy level. You can specify the ethernet, fibre-channel, or
management-ethernet interface type.
NOTE: When red alarms or major alarms are issued on an ACX5000 router,
the alarm LED glows amber instead of red.
Related
Documentation
• Understanding Alarms
Copyright © 2015, Juniper Networks, Inc.164
ACX5048 and ACX5096 Universal Access Router
To Next Page
Loading...
